Dealer Management · November 2026
Dealer Schemes and Slab Offers: How Electricals and Consumer Durables Brands Track Them
By Kishan Bhatt · Updated
Short answer: A dealer scheme goes wrong when its rules live in a WhatsApp message and its payout is worked out weeks later from memory. Write each scheme down once, with its dates, products, dealers, slabs and how sales are counted. Show dealers their progress while the scheme runs, and pay from the same record. If the payout is a discount given after the sale, it must also be handled correctly for GST.
If you sell fans, switches, wires, lighting, appliances or other consumer durables through dealers, you probably run offers all year: a slab offer for a quarter, a festive scheme, an extra discount on one model. Each one is simple on the day it is announced. Dozens of them across hundreds of dealers is where the trouble starts. This guide is about keeping those offers under control. It is general information, and I say below where I could not confirm something.
Why schemes go wrong
The cracks are the same in most dealer networks. Two sources describe them, and they come from different directions.
- Payouts worked out after the fact. A field-sales software company, MAssist CRM, describes "scheme payouts calculated after the fact, with disputes eating into the sales team's time", and says "the longer a scheme payout takes to calculate, the more disputes pile up". That is a vendor's view, so treat it as a description of the problem and not as proof of how common it is. (MAssist CRM blog)
- Misuse of scheme benefits. KPMG India's 2021 paper on sales and distribution spends lists vulnerabilities such as "fictitious secondary sales", recorded "in order to obtain undue scheme benefits by channel partners", and "channel stuffing" at the end of a sales cycle to get channel and loyalty benefits, with the material returned in later months. KPMG says trade schemes are low-value, hard to monitor and involve many parties. (KPMG India, Sales and distribution spends: are these vulnerable to leakages?)
- The cost is real. The same KPMG paper says companies treat marketing and distribution spending as a cost of customer acquisition, and that it "generally amounts to 7-15 per cent of the total sales". It is a general figure, not one for electricals alone.
Neither source says how often this happens at a small manufacturer. I include them because they match what a notebook-and-WhatsApp system tends to produce: unclear rules, late payouts and arguments.
What to write down for every scheme
One scheme, one record. If any of these is missing, a dispute is waiting to happen.
| Write this down | Why it matters |
|---|---|
| Name and a one-line description | So everyone means the same offer |
| Start date and end date | The most common argument is about an invoice dated one day outside the window |
| Products or models covered | A slab on "fans" is unclear if you also sell a premium line |
| Which dealers are eligible | Not every dealer gets every offer |
| The slabs | For example: buy up to a set value, get one rate; above it, a higher rate. Say whether the higher rate applies to all purchases or only to the extra |
| How a sale is counted | Invoice date, delivery date or payment received. Returns and cancelled orders need a rule too |
| How the dealer is paid | A credit note, a cash payout, a gift or a trip. Each is handled differently in accounts |
| Who approves and by when | So payouts do not wait for one person to remember |
Rules that stop most disputes
- Announce it in writing, once. One message or sheet that every dealer and salesperson receives, with the table above filled in.
- Show dealers their progress while the scheme runs. A dealer who can see "you are 40,000 short of the next slab" makes better ordering decisions than one who finds out at month-end.
- Count from invoices, not from memory. Work out eligibility from your own invoice records and the rule you wrote.
- Pay from the same record you counted from. The amount paid should always trace back to the invoices that earned it.
- Check unusual jumps. A dealer who suddenly buys a lot in the last days of a scheme, then returns goods next month, is worth a second look. KPMG names this pattern as a risk.
- Keep the end of the scheme clear. Close it on the stated date. Do not quietly extend it for one dealer.
If the payout is a discount given later: the GST side
Many scheme payouts are discounts given after the sale, often as a credit note at the end of a quarter. The GST rules for this matter, and they have changed recently, so read this carefully and check with your accountant.
- Section 15(3)(b), as shown on CBIC's tax repository today, keeps a discount given after the supply out of the taxable value if a credit note has been issued by the supplier and the input tax credit attributable to the discount has been reversed by the recipient, under Section 34. (CGST Act, Section 15)
- Section 34(1) now names a discount under Section 15(3)(b) as a case where a credit note can be issued.
- Section 34(2) sets a deadline. The credit note must be declared in the return for the month it was issued, but not later than 30 November following the end of the financial year in which the supply was made, or the date of the annual return, whichever is earlier. There is also a condition: the supplier's output tax is not reduced if a registered recipient has not reversed the input tax credit. (CGST Act, Section 34)
Two cautions. First, the same CBIC page for Section 15 still shows an older version of the clause, which required the discount to be agreed in advance and linked to specific invoices. Commentary websites say the new wording took effect on 1 November 2026, but I could not open the notification that sets the date, so I am not stating a date as fact. Ask your chartered accountant which version applies to discounts on supplies made before and after the change. Second, none of this is tax advice. The point for scheme tracking is simple: the system should be able to show which invoices a payout relates to, because your accountant will need that.
What a spreadsheet can and cannot do
A spreadsheet works for a handful of dealers and one or two schemes. It starts to strain when schemes overlap, dealers have different terms, and returns change the totals. At that point a small system helps by storing each scheme as a record, working out each dealer's progress from invoices, and showing the dealer and the salesperson the same number.
Here is the honest limit. A tool built on your own orders and invoices tracks what dealers buy from you. It cannot see what a dealer sells to customers unless the dealer reports it. If your scheme rewards sell-out (sales to customers), you need dealer reports or another way to verify them, as KPMG's list of fake secondary sales shows. I would not promise that any tool removes that risk.
Where I fit
I have not built a system for a consumer durables brand. What carries over is the dealer credit, scheme and collection tracking I built from running Lukeron's own dealer network, described in my dealer management guide and order, quotation and dealer management service. A single-workflow tool, such as scheme tracking on top of your existing invoices, is usually in the ₹40,000 to ₹80,000 range, fixed before work starts. What drives that price is in the software cost guide. If dealers are also paying late, read India's 45-day rule for late dealer payments.
This article is general information as of 17 November 2026 and is not legal or tax advice. GST rules change, so confirm the current wording with your chartered accountant and the CBIC website before acting.
Questions people ask
- What should a dealer scheme record contain?
- The scheme name, start and end dates, products covered, eligible dealers, the slabs, how a sale is counted (invoice, delivery or payment), how the dealer is paid, and who approves the payout. A scheme with any of these missing tends to end in a dispute.
- Why do dealer scheme payouts cause disputes?
- Usually because the rules were never written in one place and the payout is worked out late, after the dealer has already made ordering decisions. A software vendor, MAssist CRM, makes the same point; it is a vendor view, not a measured rate.
- Is a scheme payout given after the sale treated differently for GST?
- Yes. Under Section 15(3)(b) as shown on CBIC's site, a discount given after the supply is excluded from value if the supplier issues a credit note and the recipient reverses the attributable input tax credit. Section 34(2) also sets a deadline for declaring the credit note. Confirm the current wording and its effective date with your chartered accountant.
- Can a spreadsheet track dealer schemes?
- For a few dealers and one or two schemes, yes. It strains when schemes overlap, dealers have different terms and returns change the totals. At that point storing each scheme as a record and counting from invoices is safer.
- Can a dealer system stop fake sales to claim a scheme?
- Not by itself. A system built on your own invoices shows what dealers buy from you, not what they sell on. If a scheme rewards sell-out, you need dealer reports or checks, and no tool removes that risk completely.
Running dealer schemes on WhatsApp and spreadsheets? A short call can show what tracking them properly would look like for your network. No obligation.
Get in touch →